MULTI HCL-9000S Clamp Meter

Safe AC current measurement by optical isolated. transmission method for the circuit having internal voltage from AC 80V to AC 23000V.

Features:

Safe AC current measurement by optical isolated.
transmission method for the circuit having internal voltage from AC 80V to AC 23000V.
Provides wide range of current measurements from AC 0.01A to 600A.
Provides the smooth and easy clamping of the cable with special made PUSH TO OPEN and PULL TO DISCONNET mechanism.
Useful analog signal data output for the recorder.
Sealed for splash proof and contaminants.

Specification:

Measuring function	AC load current
Measuring method	Dual slope integration mode
AC conversion	Average sensing rms reading
Structure	Handle and display part is Optically isolated from CT part
Display	3.5 digit LCD, max. reading of 1999 with annunciators
Measuring range	AC 0-20A / 600A(50/60Hz), 2 ranges manual
Accuracy	(23℃±5℃, 80RH or less)
	Range	Resolution	Accuracy(50/60Hz)
	AC 20A	0.01A	±2.5% rdg ± 8 dgt
	AC 600A	1A	0-400A :±2.5% rdg ± 8 dgt
			400-600A :±3% rdg ± 8 dgt
Jaw opening capability	35mmφ
Low battery indication	Red LED lamp(CT)
	"B" mark on LCD(Display unit)
Optical transmission	Infrared LED
Optical transmission	Infrared LED
Sampling	2 times/sec
Data hold indication	"DH" mark on LCD
Data output	DC 100mV (20A range)
	DC 30mV (600A range)
Data output accuracy	±1% of full count
	Output impedance: 10kΩ or less
Insulation resistance	100MΩ or more by DC 1000V insulation tester
	(Between operation handle and core of CT)
Withstanding voltage	AC 46kV, 1 minute
	(Between operation handle and core of CT)
Limitation of circuit voltage	AC 80Vrms to 23000Vrms
Power supply	CT part : 1.5V ("AAA" size) ×3
	Display part : 1.5V ("AAA" size) ×2
Power consumption	CT part : 5mA
	Display part : 3mA
Splash proof	Water resistance rank Ⅱ(Japanese standard)
Size	70(W)×550(H)×48(D)mm (When retracted)
	70(W)×1110(H)×48(D)mm (When stretched)
Weight	Approx. 800g
Accessories	Carrying case		1
	Instruction manual		1
	Batteries		5