product (empty)



Fluke LH41 Clamp Meter

Fluke LH41 Clamp Meter
AC and DC clamp on current measurement up to 1000A; Compact lightweight design.

More details

$784.50 tax incl.

Availability: Shipping to Worldwide

Add to cart



  • AC and DC clamp on current measurement up to 1000A
  • Compact lightweight design
  • Autoranging 4A/40A
  • Excellent accuracy
  • Display-Hold for convenience in use
  • Conformance to IEC1010 and EMC standards
  • Low battery indicator
  • DC Auto Zero
  • 1 mA Resolution
  • Auto Power off




Ranges (auto-ranging) 4A, 40A
Measurement Methods AC RMS responding or DC
Resolution 1 mA (4A range)
10 mA (40A range)
Basic Accuracy ± 1.3% of reading ± 5 digits
Maximum measurable load 40A DC or AC peak
Maximum overload 150 Amps
Frequency Response
AC A 40Hz - 400Hz
DC A DC only
Size and type 4000-count LCD
10mm/0.4-inch characters
Status indication Low Battery, Polarity
Refresh rate 3 times per second
Power Supply
Battery type 9V Alkaline: MN1604, PP3.
IEC 6LR61 or equivalent
Battery life Typically 15 hours
dependent on duty cycle
Mechanical Data
Dimensions (H x W x D) 184 x 71 x 31mm
7.24 x 2.80 x 1.22 inch
Weight 235 gm/0.52lbs
Jaw Capacity 1 x 19mm/0.75inch ∅ cable
Environmental Data
Operating Temperature 0°C to 50°C (32°F to 122°F)
Temperature Coefficient (excluding offset) ± 0.05% of reading per °C
± 0.03 of reading per °F
Storage Temperature (without battery) -20°C to 60°C (-4°F to 140°F)
Complies with IEC 1010-1, 300V working
Installation category III, Pollution degree 2.
Maximum Safe Voltage
Current measurement (bare conductors) 300V AC RMS or DC between uninsulated conductor & ground


  • $0.00 $0.00